Baofeng uv-3R

Welcome to the official Charlie Tango DX Group CB And Amateur Radio Forum. We hope you enjoy your visit.

Charlie Tango DX is a group dedicated to Hobby Radio Users in all forms, whether CB, Amateur, PMR446, Scanning and Short Wave Listening.
We are a very active and friendly group that welcomes anyone from anywhere in the world who has an interest in Radio, regardless of their level of experience, their equipment, their location, or their radio preference. We have members varying from fully qualified operators on the Amateur Bands, to newcomers who have just bought a PMR446 set, and many CBers both old and new. All are equal on the Site.

The CT Site contains many reviews, tips and modifications within the forums, and we take pride that no sensible question is ever left unanswered, and nobody is ever belittled or mocked for asking an honest question, no matter how simple it may seem. We were all new to the hobby once.

You're currently viewing our forum as a guest. This means you are limited to certain areas of the board and there are some features you can't use. If you join Charlie Tango you'll be able to access member-only ections, and use member-only features such as customizing your profile, sending personal messages, voting in polls, viewing modifications and more.

If you are not yet a member: Registration is simple, fast, and completely free. Simply CLICK HERE to start the Registration process. Your application will need to include your personal name and approximate location, it will require you to confirm your email, and then be signed-off by one of our Admin Staff, but this is usually completed within 24 hours (48 max)

Baofeng uv-3R; Headphone/mic pinout
Topic Started: 7 May 2012 - 12:01 (558 Views)
M0AGY	7 May 2012 - 12:01 Post #1
26 Charlie Tango 583 Posts: 20 Group: Member Member #1,011 Joined: 20-Mar 2011 MANDATORY_Country England MANDATORY_Location cornwall MANDATORY_FirstName mark	Hi all trying to wire up a headset i have to a 4 pin plug to run on the Baofeng uv-3r i tried working out the pinouts from the schimatic but can`t seem to get it right does anyone know the pinouts. pin 1----tip pin 2----next to pin 1 pin 3---- next to screen pin 4---- screen thanks mark



Stigg	5 Jun 2012 - 13:25 Post #2
26 Charlie Tango 819 Posts: 18 Group: Member Member #2,701 Joined: 2-Jun 2012 MANDATORY_Country England MANDATORY_Location Morley. Leeds MANDATORY_FirstName Stew	For the 4 way 3.5mm jack. From the tip to plastic. Tip - speaker Ring2 - mic Ring3 - ptt Surround - ground 73's Stew.



M0AGY	18 Jun 2012 - 17:03 Post #3
26 Charlie Tango 583 Posts: 20 Group: Member Member #1,011 Joined: 20-Mar 2011 MANDATORY_Country England MANDATORY_Location cornwall MANDATORY_FirstName mark	thanks stew i`ll give it a go.



1 user reading this topic (1 Guest and 0 Anonymous)


« Previous Topic · VHF and UHF (inc PMR) · Next Topic »